Floor Coating Services in Gilbert & East Valley, AZ

Five systems, all installed on 100% solids product at ≥10 mil with UV-stable topcoats — engineered for Arizona slab temps and 300 days of sun.

100%

Solids Epoxy

≥10 mil

Film Thickness

UV-Stable

Polyaspartic Topcoat

24 hr

Quote Response

What sets our systems apart

Every floor coating contractor in the East Valley claims to do epoxy. The difference is in the spec. Most budget installs use water-based or solvent-based epoxy at 30–45% solids — meaning 55–70% of what goes on the floor evaporates during cure, leaving you with a thin film that peels under Arizona heat.

We install 100% solids epoxy. Every ounce you put down stays down. Our base coats dry at ≥10 mil thickness before the decorative chip layer and topcoat. That's 5–8x the film thickness of a typical big-box DIY kit.

Surface prep is not negotiable. We diamond grind to CSP 2–3 on every job — not acid etch, not pressure wash. We test moisture vapor emission before coating. We fill cracks with semi-rigid polyurea filler that moves with the slab through Arizona's 60°F daily temperature swings.

Topcoats are UV-stable aliphatic chemistry. Arizona gets 299 sunny days per year. Aromatic epoxy topcoats — the cheaper option — yellow within 2–3 years under that UV load. Our aliphatic polyaspartic and polyurethane topcoats don't.

Get a written quote before we leave your driveway

In-home estimates within 24 hours. We measure, assess the slab, and quote the right system for your specific project.

Call Now Free Quote