Concrete Polishing in Gilbert, AZ

Mechanical grind-and-densify polished concrete — matte through high-gloss finishes. Low-maintenance, no topcoat to peel, and works beautifully with Arizona passive solar designs.

100%

Solids Epoxy

≥10 mil

Film Thickness

UV-Stable

Polyaspartic Topcoat

24 hr

Quote Response

Polished concrete is a different category from coatings. Instead of putting a film on top of the concrete, you remove the surface layer mechanically and apply a chemical densifier that reacts with the concrete itself. The result is a hard, dense surface that can't peel because there's nothing on top to peel.

How polished concrete works

The process is a series of diamond tooling passes at progressively finer grits — typically starting at 50–100 grit for grinding, moving through 200, 400, 800, 1500, and 3000 grit for polishing. Between the grinding and polishing passes, a lithium silicate densifier is applied and allowed to penetrate. The densifier reacts with calcium hydroxide in the concrete to form additional calcium silicate hydrate — essentially making the concrete denser and harder. The final surface hardness is higher than the original concrete, and the polish level is determined by how many polishing passes you complete.

Levels of polish

Four standard finish levels. Cream polish (matte, low-grit finish) works for utilitarian warehouses and back-of-house areas. Salt-and-pepper (100–200 grit, semi-matte) shows the aggregate and is the most popular commercial choice. Full-aggregate exposure (400–800 grit, satin) shows decorative stone and is common in modern retail and restaurants. High-gloss (1500–3000 grit) gives a mirror-like surface finish used in showrooms, modern homes, and design-forward commercial spaces.

Best applications in Arizona

Polished concrete works particularly well in Arizona passive solar designs — concrete's thermal mass absorbs heat during the day and releases it at night, reducing HVAC load. Modern Phoenix-area homes are being built with polished concrete as a primary floor finish in living areas. Commercial applications — warehouses, retail, restaurants — benefit from low maintenance (no coating to strip or recoat, just periodic burnishing). Showrooms and auto dealerships use high-gloss polished concrete as a premium floor statement.

Pricing

Polished concrete runs $4–$8/sqft installed for most applications. Cream polish at the low end; full high-gloss at the high end. Typical residential space (1,000 sqft): $4,000–$8,000 including grinding, densifier, and final polish. Warehouse-scale projects drop below $4/sqft on large flat-rate agreements.

Typical pricing

Cream/matte finish (warehouse, utility) $4 – $5/sqft
Salt-and-pepper finish (retail, modern home) $5 – $6.50/sqft
High-gloss finish (showroom, custom home) $6.50 – $8/sqft

Includes diamond grinding, basic crack repair, moisture testing, full system installation. Additional prep quoted after slab assessment.

Project photos

High-gloss polished concrete in Gilbert custom home Salt-and-pepper polished concrete commercial space Polished concrete warehouse floor in Mesa Residential polished concrete living area

Concrete Polishing — frequently asked questions

Does polished concrete work with radiant floor heating?
Yes. Concrete's thermal conductivity makes it an excellent partner for radiant heating systems, and polished concrete (no insulating coating layer) transmits radiant heat more efficiently than epoxy-coated floors. Common in Arizona passive solar and high-end custom homes.
Can polished concrete be installed over an existing coating?
The existing coating must be removed first. Diamond grinding removes most coatings, but thick epoxy systems or contaminated surfaces may require shot blasting. We assess at the estimate.
Is polished concrete slippery?
High-gloss polished concrete can be slippery when wet, similar to polished tile. For commercial kitchens and bathrooms, we stay at a satin or salt-and-pepper finish level and add anti-slip aggregate to the final burnishing pass. Residential living areas at high gloss are typically fine with normal use.
How is polished concrete maintained?
Dry sweep daily, damp mop with pH-neutral cleaner, and periodic burnishing with a high-speed burnisher (commercial) or a standard floor pad (residential). No stripping, no recoating. Annual densifier reapplication extends shine on high-traffic areas.

Get a free in-home estimate

We measure, assess the slab, and give you a written quote before leaving. No obligation.

Call Now Free Quote